FREE SHIPPING !!! Purchase RM150 & above... Shop Now!
Cart 0
1490639455_1005181_z

PowerMaxXX 1450mAh 6.6V 2S 20C LiFePo4 Receiver Pack = PMKE-RX14502S20-wss

RM 89.99


 

 


 
Serious Power for Serious Hobbyists...!!!PMKE-RX14502S20
SPEC: 
Capicity (mAh) :1450
Voltage :2cell / 6.6V
Discharge (C) :20 Constant / 40 Burst
Normal Charge Rate :1C
Maximum Charge Rate :1C
Balance Plug :JST-XH
Discharge Plug :JR/Spektrum & Futaba plug
Wire Gauge22AWG
Dimensions :85 x 15 x 33
Length (mm):85
Height (mm):15
Width (mm) :33
Weight (g) : (Including wire,plugs & case)84

 

Buy Separately Additional Items: RC LiPo ChargingSafe Fire proof Guard Bag Sack

 

Almost all receiver power packs today are made using NiMH cells. Many users have noted the much higher capacity or lighter weight of Lipo cells, but LiPo have voltage "too high" (3.7V/cell) to work reliably with most receivers, and servos.

But unlike LiPo, LiFePO4 cells (3.3V/cell) can be an excellent replacement for NiMH on voltage basis. And compared to high-capacity NiMH packs, the PowerMaXX LifePO4 Radio batteries have these other advantages:

  • More capacity per gram, meaning lighter models in flight
  • Almost no "self discharge", so your radio system is always ready to go even weeks after charging.
  • Superior voltage performance under load, so your servos perform with more consistent torque and speed.

 

NOTE:

Do not leave the charger is operating unattended as it may cause a fire.

BATTERY CARES

Instructions:

1.Read the instructions on your device before using batteries.

2.Insert batteries into your device properly, with the (+) and (-) terminals aligned correctly.

3.Remove batteries from any device that will be stored for long periods of time.

4.It is normal for batteries to become hot during charging and they will gradually cool down to room temperature after fully charged.

5.Store the batteries in a cool and dry place.

6.Remove batteries from the electrical device after use.

7. If the performance of the batteries decrease substantially, it is time to replace the batteries.

8.Keep batteries away from children. If swallowed, contact a physician at once.

 

Warnings:

1.Never mix battery types in a device. Battery leakage may occur. Examples of battery types are alkaline, heavy duty, rechargeable.

2.Never mix old and new batteries in a device. Battery leakage may occur. Replace all batteries in a device at the same time.

3.Do not overcharge or overdischarge batteries. It will decrease the batteries' service life.

4.Never mix batteries of different capacities (e.g. 1200mAh and 1800mAh) in the electronic device.

5.Do not short circuit, incinerate and disassemble batteries.

6.Do not dispose of batteries in fire. They can rupture or leak.

7. Do not drop or cause unnecessary shocks to the battery.

8.Do not carry loose batteries in a pocket or purse with metal objects like coins, paper clips and hair pins, etc. This will short circuit the battery, generating high heat.